You just got home from a long day of errands. The sun is setting and you’re tired. The last thing you want to do is get out of your car and open the garage door. But as you pull into the driveway, you realize there’s a big gap at the bottom of the garage door. Cold air is pouring in and you can see the light from the street. You sigh and get out of the car. You’ll have to fix that gap before you can go inside.
Image: www.wcmanet.org
I know that feeling. I’ve been there, too. But don’t worry, fixing a gap under a garage door is a relatively easy task that can be done in a few minutes. You might have to spend a little bit on a new bottom seal. Here’s how to do it:
Identify the Source of the Gap
The first step is to identify the source of the gap. There are a few possible causes, including:
- The garage door is not properly aligned.
- The bottom seal is worn or damaged.
- The tracks are bent or misaligned.
Once you’ve identified the source of the gap, you can start to make repairs.
Replacing the Bottom Seal
If the bottom seal is worn or damaged, you will need to replace it. This is a relatively easy task that can be done in a few minutes. Here’s how to do it:
- Remove the old bottom seal.
- Clean the area where the new seal will be installed.
- Apply a bead of adhesive to the back of the new seal.
- Press the new seal into place.
Once the new seal is in place, you should be able to close the garage door and see that the gap has been eliminated.
Realigning the Garage Door
If the garage door is not properly aligned, you will need to realign it. This can be a tricky task because the springs that hold the door in place are very strong. If you are not comfortable working with springs, it is best to call a professional for help.
To realign the garage door, you will need to loosen the bolts that hold the door to the tracks. Once the bolts are loose, you can use a pry bar or a hammer to move the door into alignment. Once the door is aligned, tighten the bolts.
Image: garagean.com
Adjusting the Tracks
If the tracks are bent or misaligned, you will need to adjust them. This can be a tricky task because it requires you to remove the garage door from the tracks. If you are not comfortable working with springs, it is best to call a professional for help.
To remove the garage door from the tracks, you will need to disconnect the springs. Once the garage door is removed, you can adjust the tracks by using a level and a wrench.
Once the tracks are aligned, you can重新install the garage door. After the garage door is重新installed, make sure to check the gap at the bottom of the door. If the gap is still there, you may need to further adjust the springs.
I hope this helps you fix the gap under your garage door. If you have any other questions, please feel free to leave a comment below.
How To Fix Gap Under Garage Door
FAQs
Q: What is the best way to prevent gaps from forming under my garage door?
A: The best way to prevent gaps from forming under your garage door is to regularly inspect the bottom seal and the tracks. If you see any signs of wear or damage, repair or replace them as soon as possible.
Q: How often should I replace the bottom seal on my garage door?
A: The bottom seal on your garage door should be replaced every 5-7 years. However, if you live in an area with extreme weather conditions, you may need to replace it more often.
Q: Can I adjust the springs on my garage door myself?
A: Adjusting the springs on your garage door can be dangerous if you do not know what you are doing. It is best to leave this task to a professional.
